Jiangsu Far J-TL mechanical seal

       

Bian Angbu (Hangzhou) Mechanical Seal Co., Ltd. specializes in the design, manufacture and sale of Jiangsu Faer J-TL grout circulating pump mechanical seal, which is used for gypsum and grout circulating pump in coal-fired power plants.

 

Jiangsu Far J-TL grout circulating pump (300J-700J caliber pump) seal is a single end face assembled mechanical seal. Easy to install and simple to use. Balance, arbitrary handedness. Short internal working length. Static ring compensation multiple spring external does not contact with the medium. Jiangsu Far J-TL peripheral desulphurization pump (50J-150J diameter pump) seals are divided into single end face assembled seal and double end face non-assembled seal. The grout circulating pump is a single end face assembled mechanical seal. Easy to install and simple to use. Balance, arbitrary handedness. Short internal working length. Static ring compensation multiple spring external does not contact with the medium. The peripheral pump seal is a double-end non-assembled mechanical seal, and the sealed cooling water pressure is 0.1MPa higher than the pump chamber pressure when in use.

 

 

 

Working parameters:

 

Fixed content: ≤30%

 

The temperature: - 20 ℃ to 200 ℃

 

Pressure: 2.4 MPa or less

 

Shaft diameter: 220 mm or less

 

 

 

Main applications:

 

The mechanical seal is used FOR desulfurization of flue gas from coal-fired power generation. It is suitable for slurry circulation pump of absorption tower, gypsum slurry pump, limestone slurry pump and gypsum discharge pump.

 

 

 

Common models:

 

700J-TL-7000 700J-TL-6300 700J-TL-6150 600J-TL-5300 500J-TL-4500 450J-TL-2680

 

450J-TL-2650 450J-TL-2600 350J-TL-1950 350J-TL-1500 300J-TL-1060 150J-TL-475

 

150J-TL-315 150J-TL-250 125J-TL-400B 125J-TL-315 125J-TL-300 100J-TL-400

 

100J-TL-380 100J-TL-350 100J-TL-315 100J-TL-300A 65J-TL-400 65J-TL-380

 

65J-TL-350 50J-TL-400 50J-TL-315B